Cutting to size and fixing

Cutting to size

PVC can be worked like wood. All joinery tools and machines can therefore be used (cutting tools should protrude minimally) and aluminium saws (small toothed blades).

Door protection: Decosheet panels can be drilled for door
handles using an ordinary drill with a wood or steel bit.

Fixing

It is very important – for optimum results – to use a roller when installing any products requiring the use of glues or self-adhesive tape.

For best results, products using adhesive should be installed at a temperature of +10° C on regular, undamaged, and perfectly clean surfaces. The adhesive can be used on all surfaces except those that
are plastic-coated or ceramic.

Please do not hesitate to ask for our advice. It is extremely important, when working with glued mountings, to work on a clean, dry surface
that is free from any trace of grease or dust.

Mechanically fixed products: refer to the table below to check that you are using the right plugs.

WALL TYPE	MECHANICALLY FIXED PRODUCTS
Plasterboard with wood reinforcement	Wood screw
Plasterboard without reinforcement	Metal expansion plug
Hollow brick	Metal expansion plug
Hollow breeze block	Metal expansion plug
Plaster tile	Self tapping metal plug
Cellular concrete	Self tapping metal plug
Concrete	Nylon plug
Solid brick	Nylon plug
Solid breeze block	Nylon plug
Old wall	Expansion bolt or chemical anchoring
Friable wall	Expansion bolt or chemical anchoring